{"title":"Engine Components","description":"","products":[{"product_id":"tomei-forged-h-beam-connecting-rod-kit-for-nissan-vq35de-144-2mm","title":"Tomei Forged H-Beam Connecting Rod Kit For Nissan VQ35DE - 144.2mm (STD)","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eConnecting Rod Spec:\u003cbr\u003e\nLength C-to-C: 144.2mm - (OEM Spec)\u003cbr\u003e\nBE.BORE x WIDTH: 55.0 x 20.8mm\u003cbr\u003e\nPE.BORE x WIDTH (Bush inner cir): 22.0 x 20.8mm\u003cbr\u003e\nMaterial: SNCM439\u003c\/p\u003e\n\u003cp\u003eConrod Bolt - ARP L19:\u003cbr\u003e\nBolt Size: 3\/8-24\u003cbr\u003e\nHeight Under Neck: 40mm\u003c\/p\u003e\n\u003cp\u003eConrod Bearing size:\u003cbr\u003e\nInner Circum.(mm): 52.0mm\u003cbr\u003e\nBearing Width (mm): 16.5mm\u003c\/p\u003e\n\u003cp\u003eWeight: 534.0g\u003c\/p\u003e\n\u003cp\u003eThe connecting rods role is to transfer the compressed pressure that the piston receives to the crankshaft. When the connecting rod becomes one \nwith the piston the connecting rods inertial weight and balance then plays a major factor in the smoothness of the engines rotation assembly and \ndurability at high RPM. The weight factor itself will dramatically change the engines characteristics. The overall strength, balance and light \nweight properties that the TOMEI connecting rod design will take your engine to the next level.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003e1. Lightweight and high rigidity - Resistant to torsion and has achieved reduction in weight while maintaining the same strength as I beam design.\u003cbr\u003e\n2. Rigidity of the big end improved by slant design - The shoulder shape is smoothed by making the connecting rod bolts a through bolt type and improving the rigidity of the big end.\u003cbr\u003e\n3. Rib shaped caps - The rigidity of the connecting rod caps is increased by the two ribs and preventing bearing failure due to deformation of the big end.\u003cbr\u003e\n4. Large diameter dowel pin - Bearing failure from deformation of the big end is prevented by keeping the high rigidity of the big end with large diameter dowel pin.\u003cbr\u003e\n5. Oil supplied by 2 ports to the small end - Seizing failure is prevented by increasing the amount of oil supplied, and the offset placement increases strength against pulling at high revolution.\u003cbr\u003e\n6. High strength ARP L19 bolts - The fatigue strength and tenstile strength are increased compared to the general ARP2000, and the big end is joined more firmly.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":15621478481983,"sku":"TM-TA203A-NS04A","price":1026.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/88d9311931f35625ce1cc923b5d5b611.jpg?v=1570521651"},{"product_id":"tomei-headgasket-96-0-0-7mm-for-nissan-vq35de-2-pc-set-ta4070-ns04a","title":"Tomei Metal Headgasket for Nissan 350Z VQ35DE - 96.0-0.7mm - 2pc\/set","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei VQ35DE Head Gasket\u003c\/p\u003e\n\u003cp\u003eCompatibility: Nissan VQ35DE\u003c\/p\u003e\n\u003cp\u003eSpec:\u003c\/p\u003e\n\u003cp\u003eBore: 96.0mm\u003cbr\u003e\nThickness: 0.7mm\u003cbr\u003e\nMaterial: Metal\u003cbr\u003e\nCross section: 0.7mm\u003cbr\u003e\nBead Type: Opposing Type\u003cbr\u003e\nShim Type: Stopper Type\u003c\/p\u003e\n\u003cp\u003eTomei high performance engine head gasket\u003cbr\u003e\n1. Highly durable combustion chamber seals: Withstands high power\/boost\/temperature applications.\u003cbr\u003e\n2. Precision water \u0026amp; oil route seals: Ensures a steady circulation of engine fluids.\u003cbr\u003e\n3. Engine specific gasket construction ensures optimal performance \u0026amp; least stress on block\/head.\u003cbr\u003e\n4. STAINLESS STEEL: Stainless steel is used across all our high performance gaskets. Robust and resistant to high temperatures,stainless steel facilitates efficient transfer of heat from the combustion chamber to the cylinder block. In addition, it's flexible nature further strengthens the seal made by the spring-like beads which helps prevent issues such as blown gaskets and melted cylinder blocks.\u003cbr\u003e\n5.UNIQUE RUBBER COATING: Both the top and bottom layers of the gaskets are coated in a specially developed unique rubber coating that reinforces the seal and contact with the head\/block surfaces\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":32329510191167,"sku":"TM-TA4070-NS04A","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/0dea8c9a684062461fb04f5d005e2e94.jpg?v=1589397142"},{"product_id":"tomei-headgasket-96-0-1-0mm-for-nissan-vq35de-2-pc-set-ta4070-ns04b","title":"Tomei Metal Headgasket for Nissan 350Z VQ35DE - 96.0-1.0mm - 2 pc\/set","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei VQ35DE Head Gasket\u003c\/p\u003e\n\u003cp\u003eCompatibility: Nissan VQ35DE\u003c\/p\u003e\n\u003cp\u003eSpec:\u003c\/p\u003e\n\u003cp\u003eBore: 96.0mm\u003cbr\u003e\nThickness: 1.0mm\u003cbr\u003e\nMaterial: Metal\u003cbr\u003e\nCross section: 1.0mm\u003cbr\u003e\nBead Type: Opposing Type\u003cbr\u003e\nShim Type: Stopper Type\u003c\/p\u003e\n\u003cp\u003eTomei high performance engine head gasket\u003cbr\u003e\n1. Highly durable combustion chamber seals: Withstands high power\/boost\/temperature applications.\u003cbr\u003e\n2. Precision water \u0026amp; oil route seals: Ensures a steady circulation of engine fluids.\u003cbr\u003e\n3. Engine specific gasket construction ensures optimal performance \u0026amp; least stress on block\/head.\u003cbr\u003e\n4. STAINLESS STEEL: Stainless steel is used across all our high performance gaskets. Robust and resistant to high temperatures,stainless steel facilitates efficient transfer of heat from the combustion chamber to the cylinder block. In addition, it's flexible nature further strengthens the seal made by the spring-like beads which helps prevent issues such as blown gaskets and melted cylinder blocks.\u003cbr\u003e\n5.UNIQUE RUBBER COATING: Both the top and bottom layers of the gaskets are coated in a specially developed unique rubber coating that reinforces the seal and contact with the head\/block surfaces\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":32329511239743,"sku":"TM-TA4070-NS04B","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/0dea8c9a684062461fb04f5d005e2e94_05366f67-3709-46d9-b482-095c5a221d11.jpg?v=1589397148"},{"product_id":"tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a","title":"Tomei Oval Wire Valve Spring Set For Nissan 350Z Z33 VQ35DE \/ VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei High Strength Valve Spring Set for Nissan VQ35DE \/ VQ35HR\u003c\/p\u003e\n\u003cp\u003eSpec:\u003cbr\u003e\nOval wire suited for high camshaft lift.\u003cbr\u003e\nCompatible Lift: Intake ~11.00mm\u003cbr\u003e\nAlignment: 3.00x3.75\u003cbr\u003e\nFree Length: 49.1mm\u003cbr\u003e\nSet Length: 37.0mm\u003cbr\u003e\nLift Length: 26.0mm\u003cbr\u003e\nCompress Length: 25.0mm\u003cbr\u003e\nSet Load: 24.0+\/-6% kgf\u003cbr\u003e\nLift Load: 56.8+\/-6% kgf\u003cbr\u003e\nMaterial: SWOSC-V\u003cbr\u003e\nProcess: Nitride\u003cbr\u003e\nColor ID: Blue\u003c\/p\u003e\n\u003cp\u003eKit Includes:\u003cbr\u003e\nIntake Valve Springs x 12\u003cbr\u003e\nExhaust Valve Springs x 12\u003c\/p\u003e\n\u003cp\u003eTop-tier springs are essential for accurately transferring camshaft movement to valves at high engine speeds in high-performance engines. TOMEI products are meticulously engineered with precision to meet user requirements. This includes careful selection of materials, surface coatings, and incorporation of cutting-edge technologies. Prior to production, prototypes undergo rigorous testing to ensure durability, quality, and optimal performance.\u003c\/p\u003e\n\u003cp\u003eTomei New-Concept Valve Spring Features:\u003c\/p\u003e\n\u003cp\u003e1. Enhanced Oil Tempered Chrome-Silicone Alloy Core - This wire design is optimized for racing applications, effectively reducing jump and bounce to allow for higher RPM limits. Increased fatigue limit enhances overall durability.\u003cbr\u003e\n2. Variable Stage Unequal Pitch Springs - Each spring is meticulously designed with a set rate to achieve a higher natural frequency, minimizing the risk of resonance and surging.\u003cbr\u003e\n3. Nitride Treatment - Surface treatment with Nitrogen reinforces spring material strength, ideal for handling stress fatigue. Compatible with high lift camshafts, extending spring lifespan.\u003cbr\u003e\n4. Shot Penning - Through the application of high-speed strikes from small steel balls, this process enhances the spring surface, elevating its fatigue limit. This treatment is performed during manufacturing.\u003cbr\u003e\n5. Hot Setting - Preventing permanent deformation caused by high stress loads when hot, additional measures are implemented to prevent \"Fading\" issues.\u003cbr\u003e\n6. Oval Core Wire (VQ35, VR38DETT, 4B11\/G4KF, KA24DE Applications) - Specifically designed oval shaped spring wire allows for increased compression compared to standard designs, enabling the use of high lift camshafts without compromise.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":33040025223231,"sku":"TM-TA304A-NS02A","price":405.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/b5f24f8081a0dbe1b1288aa41329a6cc.jpg?v=1600471924"},{"product_id":"tomei-oversized-racing-valve-set-for-nissan-vq35de-350z-z33","title":"Tomei Oversized Racing Valve Set For Nissan 350Z Z33 VQ35DE Engines","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Racing Valve for Nissan VQ35DE 350Z Z33\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cp\u003eIntake valve (mm): Head Dia 38.15 + 1.0 \/ Stem Dia 5.96 \/ Length 96.60\u003c\/p\u003e\n\u003cp\u003eExhaust valve (mm): Head Dia 32.35 + 1.0 \/ Stem Dia 5.97 \/ Length 94.00\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cp\u003eIntake racing valve x 12\u003c\/p\u003e\n\u003cp\u003eExhaust racing valve x 12\u003c\/p\u003e\n\u003cp\u003eNote: Please check your valve spec before purchasing.\u003c\/p\u003e\n\u003cp\u003eDescription:\u003c\/p\u003e\n\u003cp\u003eOversized Valves: The oversized head diameter is designed specifically for each application,\u003cbr\u003e\nsignificantly improving the flow rate. (Excl. FA20)\u003c\/p\u003e\n\u003cp\u003eWaisted Stem: The waisted stem allows a greater volume of air\/gases to enter\u003cbr\u003e\nand exit the combustion chamber as the valve extends. (not available on some models)\u003c\/p\u003e\n\u003cp\u003eEngine Specific Design: Each valve is designed and precision machined specifically\u003cbr\u003e\nfor the intended engine\/application. The head, face, stem and lock groove designs\u003cbr\u003e\nhave also been optimized to enhance sealing performance, efficiency and durability.\u003c\/p\u003e\n\u003cp\u003eHeat Resistance and Durability:\u003cbr\u003e\nIntake valve: The intake valves are made using SUH35 HEAT RESISTANT STEEL which is more commonly used to make exhaust valves. These are then coated with a special formula that further improves\u003cbr\u003e\nthe valves' resistance to heat, wear and corrosion.\u003cbr\u003e\nExhaust valve: In order to withstand temperatures of up to around 1000C, the exhaust valves are made using a nickel based heat resistant alloy, INCONEL 751.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":39766291611711,"sku":"TM-TA303A-NS04A","price":747.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/378011baadb6606c893dcc0f1d2b0afb_57243100-8908-4475-814a-66db52934821.jpg?v=1660694223"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-procam-set-in-282-11-30mm-ex-282-11-0mm-lift","title":"Tomei VALC Camshaft Procam IN\/EX Set 282-11.30\/11.0mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-282deg \/ EX-282deg\u003cbr\u003e\nCam Lift: IN-11.30mm \/ EX-11.00mm\u003cbr\u003e\nValve Lift: IN-11.00mm \/ EX-10.67mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg \/ EX-126.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000257097791,"sku":"TM-TA301A-NS04F","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/4b26f0bada28f2a1a49743529387fe07.jpg?v=1675986927"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-procam-set-in-274-11-30mm-ex-274-11-0mm-lift","title":"Tomei VALC Camshaft Procam IN\/EX Set 274-11.30\/11.0mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-274deg \/ EX-274deg\u003cbr\u003e\nCam Lift: IN-11.30mm \/ EX-11.00mm\u003cbr\u003e\nValve Lift: IN-11.00mm \/ EX-10.67mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg \/ EX-126.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000257261631,"sku":"TM-TA301A-NS04E","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/4b26f0bada28f2a1a49743529387fe07_7ed47c4e-32a1-4c8c-8a39-5eeb73de50b9.jpg?v=1675986950"},{"product_id":"for-350z-early-vq35de-g1-single-vtc-tomei-camshaft-poncam-in-ex-set-258-10-20mm-lift","title":"Tomei VALC Camshaft Poncam IN\/EX Set 258-10.20mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-258deg \/ EX-258deg\u003cbr\u003e\nCam Lift: IN-10.20mm \/ EX-10.20mm\u003cbr\u003e\nValve Lift: IN-9.90mm \/ EX-9.87mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg \/ EX-112.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000257491007,"sku":"TM-TA301A-NS04A","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/4b26f0bada28f2a1a49743529387fe07_70363c22-35f3-4e27-b742-1e37cb6635cd.jpg?v=1675986975"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-poncam-in-ex-set-266-10-80mm-lift","title":"Tomei VALC Camshaft Poncam IN\/EX Set 266-10.80mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-266deg \/ EX-266deg\u003cbr\u003e\nCam Lift: IN-10.80mm \/ EX-10.80mm\u003cbr\u003e\nValve Lift: IN-10.50mm \/ EX-10.47mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg \/ EX-126.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000257556543,"sku":"TM-TA301A-NS04D","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/4b26f0bada28f2a1a49743529387fe07_96e9da2a-43c7-4dda-8d15-1b76f23c0beb.jpg?v=1675986982"},{"product_id":"for-350z-early-vq35de-g1-single-vtc-tomei-camshaft-procam-set-in-274-11-30mm-ex-274-11-0mm-lift","title":"Tomei VALC Camshaft Procam IN\/EX Set 274-11.30\/11.0mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-274deg \/ EX-274deg\u003cbr\u003e\nCam Lift: IN-11.30mm \/ EX-11.00mm\u003cbr\u003e\nValve Lift: IN-11.00mm \/ EX-10.67mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg \/ EX-112.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000257654847,"sku":"TM-TA301A-NS04B","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/4b26f0bada28f2a1a49743529387fe07_ca8c43d6-351d-4347-b8b3-77849be12970.jpg?v=1675986989"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-procam-intake-set-274-11-30mm-lift","title":"Tomei VALC Camshaft Procam Intake Set 274-11.30mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-274deg\u003cbr\u003e\nCam Lift: IN-11.30mm\u003cbr\u003e\nValve Lift: IN-11.00mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259096639,"sku":"TM-TA301C-NS04E","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/db017df9229cfe2bb4dda8cb2a95abed.jpg?v=1675987114"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-procam-exhaust-set-274-11-00mm-lift","title":"Tomei VALC Camshaft Procam Exhaust Set 274-11.00mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-274deg\u003cbr\u003e\nCam Lift: EX-11.00mm\u003cbr\u003e\nValve Lift: EX-10.67mm\u003cbr\u003e\nLobe Center Line: EX-126.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259227711,"sku":"TM-TA301E-NS04E","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/d976a2588f31da64e216a2744a50e234.jpg?v=1675987128"},{"product_id":"for-350z-early-vq35de-g1-single-vtc-tomei-camshaft-procam-exhaust-282-11-00mm-lift","title":"Tomei VALC Camshaft Procam Exhaust 282-11.00mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-282deg\u003cbr\u003e\nCam Lift: EX-11.00mm\u003cbr\u003e\nValve Lift: EX-10.67mm\u003cbr\u003e\nLobe Center Line: EX-112.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259326015,"sku":"TM-TA301E-NS04C","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/d976a2588f31da64e216a2744a50e234_b134ac1d-cb23-49d5-aaf9-7bd4f6980eff.jpg?v=1675987142"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-poncam-exhaust-set-266-10-80mm-lift","title":"Tomei VALC Camshaft Poncam Exhaust Set 266-10.80mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-266deg\u003cbr\u003e\nCam Lift: EX-10.80mm\u003cbr\u003e\nValve Lift: EX-10.47mm\u003cbr\u003e\nLobe Center Line: EX-126.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259358783,"sku":"TM-TA301E-NS04D","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/d976a2588f31da64e216a2744a50e234_d1f89288-d566-4f85-bb20-26ddaadd5f53.jpg?v=1675987152"},{"product_id":"for-350z-early-vq35de-g1-single-vtc-tomei-camshaft-poncam-intake-258-10-20mm-lift","title":"Tomei VALC Camshaft Poncam Intake 258-10.20mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-258deg\u003cbr\u003e\nCam Lift: IN-10.20mm\u003cbr\u003e\nValve Lift: IN-9.90mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259457087,"sku":"TM-TA301C-NS04A","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/db017df9229cfe2bb4dda8cb2a95abed_2cc0ae4c-3daa-4b9e-81c5-051cd99e20ac.jpg?v=1675987166"},{"product_id":"for-350z-early-vq35de-g1-single-vtc-tomei-camshaft-procam-intake-274-11-30mm-lift","title":"Tomei VALC Camshaft Procam Intake 274-11.30mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-274deg\u003cbr\u003e\nCam Lift: IN-11.30mm\u003cbr\u003e\nValve Lift: IN-11.00mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259489855,"sku":"TM-TA301C-NS04B","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/db017df9229cfe2bb4dda8cb2a95abed_5d6121f6-20ca-452d-80c9-0e0cf742c3e0.jpg?v=1675987173"},{"product_id":"for-350z-early-vq35de-g1-single-vtc-tomei-camshaft-procam-intake-282-11-30mm-lift","title":"Tomei VALC Camshaft Procam Intake 282-11.30mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-282deg\u003cbr\u003e\nCam Lift: IN-11.30mm\u003cbr\u003e\nValve Lift: IN-11.00mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259522623,"sku":"TM-TA301C-NS04C","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/db017df9229cfe2bb4dda8cb2a95abed_862a228b-afdc-48e2-ba69-f00692935439.jpg?v=1675987180"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-poncam-intake-set-266-10-80mm-lift","title":"Tomei VALC Camshaft Poncam Intake Set 266-10.80mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-266deg\u003cbr\u003e\nCam Lift: IN-10.80mm\u003cbr\u003e\nValve Lift: IN-10.50mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259555391,"sku":"TM-TA301C-NS04D","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/db017df9229cfe2bb4dda8cb2a95abed_43bef9fc-c347-4ff3-8a92-fb743dd8e655.jpg?v=1675987186"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-procam-intake-set-282-11-30mm-lift","title":"Tomei VALC Camshaft Procam Intake Set 282-11.30mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-282deg\u003cbr\u003e\nCam Lift: IN-11.30mm\u003cbr\u003e\nValve Lift: IN-11.00mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000259686463,"sku":"TM-TA301C-NS04F","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/db017df9229cfe2bb4dda8cb2a95abed_600d4c50-1a33-4043-ae74-bc5b4a5addb1.jpg?v=1675987210"},{"product_id":"for-350z-late-vq35de-g2-dual-vtc-tomei-camshaft-procam-exhaust-set-282-11-00mm-lift","title":"Tomei VALC Camshaft Procam Exhaust Set 282-11.00mm Lift For 350Z Late G2 VQ35DE Rev-Up Dual VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT) VQ35DE Rev-Up (G2 \/ Int. \u0026amp; Exh. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-282deg\u003cbr\u003e\nCam Lift: EX-11.00mm\u003cbr\u003e\nValve Lift: EX-10.67mm\u003cbr\u003e\nLobe Center Line: EX-126.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000260145215,"sku":"TM-TA301E-NS04F","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/d976a2588f31da64e216a2744a50e234_5d036165-5e21-4d05-81a2-2f3d519965a9.jpg?v=1675987254"},{"product_id":"for-350z-early-vq35de-g1-single-vtc-tomei-camshaft-poncam-exhaust-258-10-20mm-lift","title":"Tomei VALC Camshaft Poncam Exhaust 258-10.20mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-258deg\u003cbr\u003e\nCam Lift: EX-10.20mm\u003cbr\u003e\nValve Lift: EX-9.87mm\u003cbr\u003e\nLobe Center Line: EX-112.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40000260210751,"sku":"TM-TA301E-NS04A","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/products\/d976a2588f31da64e216a2744a50e234_22a9ec6d-c42a-421a-a7a7-63afc70a879d.jpg?v=1675987262"},{"product_id":"tomei-forged-h-beam-connecting-rod-kit-for-nissan-vq35hr-151-80mm-std","title":"Tomei Forged H-Beam Connecting Rod Kit For Nissan VQ35HR - 151.80mm (STD)","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eConnecting Rod Spec:\u003cbr\u003e\nLength C-to-C: 151.80mm - (OEM Spec)\u003cbr\u003e\nBE.BORE x WIDTH: 57.0 x 20.8mm\u003cbr\u003e\nPE.BORE x WIDTH (Bush inner cir): 22.0 x 20.8mm\u003cbr\u003e\nMaterial: SNCM439\u003c\/p\u003e\n\u003cp\u003eConrod Bolt - ARP L19:\u003cbr\u003e\nBolt Size: 3\/8-24\u003cbr\u003e\nHeight Under Neck: 40mm\u003c\/p\u003e\n\u003cp\u003eConrod Bearing size:\u003cbr\u003e\nInner Circum.(mm): 44.0mm\u003cbr\u003e\nBearing Width (mm): 16.5mm\u003c\/p\u003e\n\u003cp\u003eWeight: 563.0g\u003c\/p\u003e\n\u003cp\u003eThe connecting rods role is to transfer the compressed pressure that the piston receives to the crankshaft. When the connecting rod becomes one \nwith the piston the connecting rods inertial weight and balance then plays a major factor in the smoothness of the engines rotation assembly and \ndurability at high RPM. The weight factor itself will dramatically change the engines characteristics. The overall strength, balance and light \nweight properties that the TOMEI connecting rod design will take your engine to the next level.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003e1. Lightweight and high rigidity - Resistant to torsion and has achieved reduction in weight while maintaining the same strength as I beam design.\u003cbr\u003e\n2. Rigidity of the big end improved by slant design - The shoulder shape is smoothed by making the connecting rod bolts a through bolt type and improving the rigidity of the big end.\u003cbr\u003e\n3. Rib shaped caps - The rigidity of the connecting rod caps is increased by the two ribs and preventing bearing failure due to deformation of the big end.\u003cbr\u003e\n4. Large diameter dowel pin - Bearing failure from deformation of the big end is prevented by keeping the high rigidity of the big end with large diameter dowel pin.\u003cbr\u003e\n5. Oil supplied by 2 ports to the small end - Seizing failure is prevented by increasing the amount of oil supplied, and the offset placement increases strength against pulling at high revolution.\u003cbr\u003e\n6. High strength ARP L19 bolts - The fatigue strength and tenstile strength are increased compared to the general ARP2000, and the big end is joined more firmly.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40548387389503,"sku":"TM-TA203A-NS03A","price":1026.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/e540c9c0e85dce6c0111e6e3037f1ee2.jpg?v=1710973763"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-procam-intake-set-282-11-30mm-lift-1","title":"Tomei VALC Camshaft Procam Intake Set 282-11.30mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-282deg\u003cbr\u003e\nCam Lift: IN-11.30mm\u003cbr\u003e\nValve Lift: IN-11.00mm\u003cbr\u003e\nLobe Center Line: IN-122.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571382071359,"sku":"TM-TA301C-NS03C","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/db017df9229cfe2bb4dda8cb2a95abed.jpg?v=1744755704"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-procam-set-in-282-11-30mm-ex-282-11-0mm-lift-1","title":"Tomei VALC Camshaft Procam IN\/EX Set 282-11.30\/11.0mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-282deg \/ EX-282deg\u003cbr\u003e\nCam Lift: IN-11.30mm \/ EX-11.00mm\u003cbr\u003e\nValve Lift: IN-11.00mm \/ EX-10.67mm\u003cbr\u003e\nLobe Center Line: IN-122.0deg \/ EX-124.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571383119935,"sku":"TM-TA301A-NS03C","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/4b26f0bada28f2a1a49743529387fe07_0554f6e8-4812-40ba-bb1a-9d1c971d44ab.jpg?v=1744755886"},{"product_id":"tomei-camshaft-procam-exhaust-274-11-00mm-lift-for-350z-g35-early-g1-vq35de-single-vtc","title":"Tomei VALC Camshaft Procam Exhaust 274-11.00mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-274deg\u003cbr\u003e\nCam Lift: EX-11.00mm\u003cbr\u003e\nValve Lift: EX-10.67mm\u003cbr\u003e\nLobe Center Line: EX-112.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571384758335,"sku":"TM-TA301E-NS04B","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/d976a2588f31da64e216a2744a50e234.jpg?v=1711578421"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-procam-set-in-274-11-30mm-ex-274-11-0mm-lift-1","title":"Tomei VALC Camshaft Procam IN\/EX Set 274-11.30\/11.0mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-274deg \/ EX-274deg\u003cbr\u003e\nCam Lift: IN-11.30mm \/ EX-11.00mm\u003cbr\u003e\nValve Lift: IN-11.00mm \/ EX-10.69mm\u003cbr\u003e\nLobe Center Line: IN-122.0deg \/ EX-124.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571388788799,"sku":"TM-TA301A-NS03B","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/4b26f0bada28f2a1a49743529387fe07_5d5573a4-994a-40ee-a72b-741ff1240a42.jpg?v=1744755978"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-procam-exhaust-set-282-11-00mm-lift-1","title":"Tomei VALC Camshaft Procam Exhaust Set 282-11.00mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-282deg\u003cbr\u003e\nCam Lift: EX-11.00mm\u003cbr\u003e\nValve Lift: EX-10.67mm\u003cbr\u003e\nLobe Center Line: EX-124.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571389444159,"sku":"TM-TA301E-NS03C","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/d976a2588f31da64e216a2744a50e234_0d4b19ff-d1d7-4957-a6fa-88fcc34ecc67.jpg?v=1744756107"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-procam-exhaust-set-274-11-00mm-lift-1","title":"Tomei VALC Camshaft Procam Exhaust Set 274-11.00mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-274deg\u003cbr\u003e\nCam Lift: EX-11.00mm\u003cbr\u003e\nValve Lift: EX-10.69mm\u003cbr\u003e\nLobe Center Line: EX-124.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571390001215,"sku":"TM-TA301E-NS03B","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/d976a2588f31da64e216a2744a50e234_70a5f610-4a68-4f61-b979-7e8fefc21a73.jpg?v=1744756186"},{"product_id":"tomei-camshaft-procam-in-ex-set-282-11-30-11-0mm-lift-for-350z-g35-early-g1-vq35de-single-vtc","title":"Tomei VALC Camshaft Procam IN\/EX Set 282-11.30\/11.0mm Lift For 350Z\/G35 Early G1 VQ35DE Single VTC","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 (MT\/AT) Infiniti G35\/V35 (MT) VQ35DE Early Model (G1 \/ Int. VTC)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-282deg \/ EX-282deg\u003cbr\u003e\nCam Lift: IN-11.30mm \/ EX-11.00mm\u003cbr\u003e\nValve Lift: IN-11.00mm \/ EX-10.67mm\u003cbr\u003e\nLobe Center Line: IN-125.0deg \/ EX-112.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571390427199,"sku":"TM-TA301A-NS04C","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/4b26f0bada28f2a1a49743529387fe07_7cc7043f-bf2b-4200-a868-3b9440ca1e01.jpg?v=1711578565"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-poncam-exhaust-set-266-10-80mm-lift-1","title":"Tomei VALC Camshaft Poncam Exhaust Set 266-10.80mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Exhaust Side\u003cbr\u003e\nDuration: EX-262deg\u003cbr\u003e\nCam Lift: EX-10.80mm\u003cbr\u003e\nValve Lift: EX-10.47mm\u003cbr\u003e\nLobe Center Line: EX-124.0 deg\u003cbr\u003e\nBase Circle: EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571395768383,"sku":"TM-TA301E-NS03A","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/d976a2588f31da64e216a2744a50e234_7bcb15dd-2b64-46e0-914b-fb6261ee7fdb.jpg?v=1744756270"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-procam-intake-set-274-11-30mm-lift-1","title":"Tomei VALC Camshaft Procam Intake Set 274-11.30mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Procam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-274deg\u003cbr\u003e\nCam Lift: IN-11.30mm\u003cbr\u003e\nValve Lift: IN-11.00mm\u003cbr\u003e\nLobe Center Line: IN-122.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Required Tomei Valve Spring - Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571396096063,"sku":"TM-TA301C-NS03B","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/db017df9229cfe2bb4dda8cb2a95abed_858fd8ff-9273-4552-a513-78d3b253e27f.jpg?v=1744756321"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-poncam-in-ex-set-266-10-80mm-lift-1","title":"Tomei VALC Camshaft Poncam IN\/EX Set 266-10.80mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake and Exhaust Side\u003cbr\u003e\nDuration: IN-262deg \/ EX-262deg\u003cbr\u003e\nCam Lift: IN-10.80mm \/ EX-10.80mm\u003cbr\u003e\nValve Lift: IN-10.50mm \/ EX-10.47mm\u003cbr\u003e\nLobe Center Line: IN-122.0deg \/ EX-124.0 deg\u003cbr\u003e\nBase Circle: IN-35.4mm \/ EX-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm \/ EX-0.33mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571397177407,"sku":"TM-TA301A-NS03A","price":792.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/4b26f0bada28f2a1a49743529387fe07_3c995761-62ba-41cc-912f-765bdbc64be2.jpg?v=1744756370"},{"product_id":"for-nissan-350z-vq35hr-z33-tomei-camshaft-poncam-intake-set-266-10-80mm-lift-1","title":"Tomei VALC Camshaft Poncam Intake Set 266-10.80mm Lift For Nissan 350Z\/Z33 VQ35HR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei Camshaft Poncam for Nissan 350Z\/Z33 VQ35HR (MT)\u003c\/p\u003e\n\u003cp\u003ePosition: Intake Side\u003cbr\u003e\nDuration: IN-262deg\u003cbr\u003e\nCam Lift: IN-10.80mm\u003cbr\u003e\nValve Lift: IN-10.50mm\u003cbr\u003e\nLobe Center Line: IN-122.0deg\u003cbr\u003e\nBase Circle: IN-35.4mm\u003cbr\u003e\nValve Clearance when Cold: IN-0.30mm\u003c\/p\u003e\n\u003cp\u003e*Compatible with OEM Valve Lifter, Cam Gear and Valve Spring or Tomei Valve Spring - \u003ca href=\"https:\/\/www.kuremotorsport.com\/collections\/engine-components-1\/products\/tomei-valve-spring-set-for-nissan-350z-z33-vq35de-vq35hr-ta304a-ns02a\" onclick=\"window.open(this.href, '', 'resizable=no,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no'); return false;\"\u003eTM-TA304A-NS02A\u003c\/a\u003e*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTomei USA is offering its newly developed camshaft profile VALC Profile.\u003c\/p\u003e\n\u003cp\u003e* Optimized velocity and acceleration\u003cbr\u003e\n* Designed for high power setups.\u003cbr\u003e\n* Optimizes engine performance.\u003cbr\u003e\n* Higher lift than other profiles of the duration.\u003cbr\u003e\n* Reduced stress\/wear on the valve train.\u003c\/p\u003e\n\u003cp\u003e1. The VALC profile allows the valves to open faster and for longer time. This translates to faster lift and increased area under the 'lift curve' which in turn generates more power.(Greater area under the 'lift curve' = greater air intake)\u003cbr\u003e\n2. Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.\u003cbr\u003e\n3. With a conventional direct-acting valve train, the maximum lift is usually determined by the size\/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge. VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface. (Maximum cam velocity = lobe travel distance on lifter). Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift\/performance gains\u003c\/p\u003e\n\u003cp\u003eFor more information about VALC profile camshafts, \u003ca href=\"https:\/\/www.kuremotorsport.com\/blogs\/news\/tomei-valc-profile-camshafts\" target=\"_blank\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n","brand":"Tomei USA","offers":[{"title":"Default Title","offer_id":40571398324287,"sku":"TM-TA301C-NS03A","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/db017df9229cfe2bb4dda8cb2a95abed_cba77c75-c47c-444b-a7e1-43861c152486.jpg?v=1744756395"},{"product_id":"hks-fine-tune-v-belt-7pk1092-pulley-belt-for-nissan-350z-z33-hks-supercharger-110mm","title":"HKS FINE TUNE V-BELT 7PK1092 Pulley Belt For Nissan 350Z\/Z33 HKS Supercharger 110mm","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eHKS FINE TUNE V-BELT 7PK1092 Pulley Belt For Nissan 350Z\/Z33 HKS Supercharger 110mm\u003c\/p\u003e\n\u003cp\u003eNOTE: This V-Belt is for Nissan 350Z\/Z33 HKS Supercharger GTS8555 (12001-AN008) with 110mm pulley (12999-AK006)\u003c\/p\u003e\n\u003cp\u003eThe HKS Fine Tune V-Belt is engineered with advanced HKS technology to deliver exceptional durability and performance, making it an ideal replacement for a worn factory belt.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEnhanced Durability: Designed to withstand high engine bay temperatures, even in tuned vehicles.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eAll-Weather Performance: Optimized for reliable operation in both hot and cold conditions.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eLightweight Design: Provides excellent friction tolerance for smoother functionality.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003ePremium Materials: Constructed from Ethylene Propylene Diene Monomer (EPDM) for superior resilience and longevity.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":41316649893951,"sku":"hks24996-AK039","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/7c05d1f4a3a15dc1e653dbbc1fca01ec_5868845d-7791-41cc-8fb7-aa4cbf8f8aef.jpg?v=1732206172"},{"product_id":"hks-fine-tune-v-belt-7pk1070","title":"HKS FINE TUNE V-BELT 7PK1070 Pulley Belt For 350Z\/Z33 HKS Supercharger 100mm","description":"\u003cp\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eHKS FINE TUNE V-BELT 7PK1070 Pulley Belt For 350Z\/Z33 HKS Supercharger 100mm\u003c\/p\u003e\n\u003cp\u003eNOTE: This V-Belt is for the 350Z\/Z33 HKS Supercharger GTS8555 (12001-AN008) with 100mm pulley (12999-AK005)\u003c\/p\u003e\n\u003cp\u003eThe HKS Fine Tune V-Belt is engineered with advanced HKS technology to deliver exceptional durability and performance, making it an ideal replacement for a worn factory belt.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEnhanced Durability: Designed to withstand high engine bay temperatures, even in tuned vehicles.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eAll-Weather Performance: Optimized for reliable operation in both hot and cold conditions.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eLightweight Design: Provides excellent friction tolerance for smoother functionality.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003ePremium Materials: Constructed from Ethylene Propylene Diene Monomer (EPDM) for superior resilience and longevity.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe usually ship all orders within 1 day unless there is an issue with the order. In that case, we will contact you to find the best solution.\u003c\/p\u003e\r\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":41316655104063,"sku":"HKS24996-AK038","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/7860\/files\/7c05d1f4a3a15dc1e653dbbc1fca01ec_1e240c14-f1d9-4b77-ae3a-35281be64b41.jpg?v=1733183821"}],"url":"https:\/\/www.kuremotorsport.com\/collections\/nissan-350z-z33-engine-components\/engine_vq35de.oembed","provider":"Kuremotorsports","version":"1.0","type":"link"}